ForneyLink® Display Legend

Table of Contents:

ForneyLink on an automatic machine.
ForneyLink on a manual machine.

ForneyLink on an automatic machine.

1	Start Test	Start selected test	19	Machine Setup	Enter the Machine Setup menu.
2	Stop Test	Stop Selected test.	20	Reprint Test Report	Reprint tested specimen report.
3	Sample	Manage Sample menu.	21	Measure	Measurement menu for the selected specimen.
4	Set	Displays selected Set.	22	DiamAVg	The average diameter of the specimen.
5	Specimen	A quick selection of the specimens in a set.	23	LenghtAvg	The average length of the specimen.
6	Manage	Manage specimens in selected sets.	24	Age	Age of specimen to be tested.
7	Load	View load placed on the specimen.	25	Weight	Weight of Specimen
8	Stress	View Stress placed on the specimen.	26	Density	The measured density of the specimen to be tested.
9	Max Load	Max load placed on the specimen.	27	Corr. Factor	ASTM defined correction for specimen size.
10	Max Stress	Max stress placed on the specimen.	28	Ends Prep	Specimen ends preparation to be used in the test.
11	Ramp Rate	Display of specified speed for testing the specimen.	29	Exp. Strength	Display of specimen's expected strength.
12	Test Counter	Count of tests performed.	30	Preload	Set the load applied to the specimen prior to achieving the specified ramp rate.
13	Jog Advance	Move the machine piston forward.	31	Ramp Rate	Set the specified speed for testing the specimen.
14	Retract	Move the machine piston backward.	32	Break Pct.	Select stress percentage from max stress to detect break.
15	Show Graph	Show stress vs time graph of tested specimen.	33	Test Stop	Stop the test at a specific load, stress, or position (on position-equipped machines) instead of loading to specimen failure.
16	Logout	Log the current user off ForneyLink.	34	Ask for Break Type?	Enable prompt for break type after the test completes.
17	Diagnostics	Enter the diagnostic menu.	35	Language Menu	Select ForneyLink's displayed language.
18	Verify Calibration	Enter the Machine Calibration menu.

ForneyLink on a manual machine.

1	Start Test	Start selected test	18	Verify Calibration	Enter the Machine Calibration menu.
2	Stop Test	Stop Selected test.	19	Machine Setup	Enter the Machine Setup menu.
3	Sample	Manage Sample menu.	20	Reprint Test Report	Reprint tested specimen report.
4	Set	Displays selected Set.	21	Measure	Measurement menu for the selected specimen.
5	Specimen	A quick selection of the specimens in a set.	22	DiamAVg	The average diameter of the specimen.
6	Manage	Manage specimens in selected sets.	23	LenghtAvg	The average length of the specimen.
7	Load	View load placed on the specimen.	24	Age	Age of specimen to be tested.
8	Stress	View Stress placed on the specimen.	25	Weight	Weight of Specimen
9	Max Load	Max load placed on the specimen.	26	Density	The measured density of the specimen to be tested.
10	Max Stress	Max stress placed on the specimen.	27	Corr. Factor	ASTM defined correction for specimen size.
11	Ramp Rate	Display of the speed for testing the specimen.	28	Ends Prep	Specimen ends preparation to be used in the test.
12	Ramp Rate Target	Display of speed of testing target.	29	Exp. Strength	Display of specimen's expected strength.
13	Ramp Rate Tolerance	Speed of testing tolerance percentage	30	Preload	Set the load applied to the specimen prior to achieving the specified ramp rate.
14	Test Counter	Count of tests performed.	31	Ramp Rate	Set the specified speed for testing the specimen.
15	Show Graph	Show stress vs time graph of tested specimen.	32	Break Pct.	Select stress percentage from max stress to detect break.
16	Logout	Log the current user off ForneyLink.	33	Ask for Break Type?	Enable prompt for break type after the test completes.
17	Diagnostics	Enter the diagnostic menu.	34	Language Menu	Select FormeyLink's displayed language.